Home > ICND1 – Basic Questions 2

ICND1 – Basic Questions 2

June 26th, 2017 in ICND1 100-105 Go to comments

Question 1


Only a router or a Layer 3 switch can mitigate a broadcast storm because they separate broadcast domains -> B and D are correct.

Question 2


AREA 1 has “multiple collision domains” so Network Device A must be a device operating in Layer 2 or above (a router or switch) -> A & E are correct.

AREA 2 only has “single collision domain” so Network Device B must be a device operating in Layer 1 (a hub or repeater) -> D is correct.

Question 3


The “Ctrl-Shift-6” and “x” is used to suspend the telnet session. In this case, the telnet session from Router1 to Router2 will be suspended.

If we enter the keyword “resume”, Router1 will try to resume the telnet session to Router2 (you will see the line [Resuming connection 1 to … ]) and we will get back the Router2> prompt.

Question 4


In the topology above only routers and switches are used so for each link we have one collision domains. In the picture below each pink ellipse represents for one collision domain.


Question 5


Star topology is the most popular topology for the network which allows all traffic to flow through a central device.


Question 6

Question 7


Carrier Sense Multiple Access with Collision Detection (CSMA/CD) is the LAN access method used in Ethernet. When a device wants to gain access to the network, it checks to see if the network is free. If the network is not free, the device waits a random amount of time before retrying. If the network is free and two devices access the line at exactly the same time, their signals collide. When the collision is detected, they both back off and wait a random amount of time before retrying.

CSMA/CD is used with devices operating in half-duplex mode only. CSMA/CD helps devices connecting to half-duplex switch ports operate correctly.

Question 8


Ethernet frame size refers to the whole Ethernet frame, including the header and the trailer while MTU size refers only to Ethernet payload. Baby giant frames refer to Ethernet frame size up to 1600 bytes, and jumbo frame refers to Ethernet frame size up to 9216 bytes (according to this link: http://www.cisco.com/c/en/us/support/docs/switches/catalyst-4000-series-switches/29805-175.html)

For example, standard Ethernet frame MTU is 1500 bytes. This does not include the Ethernet header and Cyclic Redundancy Check (CRC) trailer, which is 18 bytes in length, to make the total Ethernet frame size of 1518.

So according to strict definition, MTU size of 1600 cannot be classified as baby giant frames as the whole Ethernet frames will surely larger than 1600 -> Answer C is not correct.

Answer D is a better choice as the MTU is 1518, so the whole Ethernet frame would be 1536 (1518 + 18 Ethernet header and CRC trailer). This satisfies the requirement of baby giant frames “Baby giant frames refer to Ethernet frame size up to 1600 bytes”.

Question 9

Question 10

Question 11


To remember which type of cable you should use, follow these tips:

– To connect two serial interfaces of 2 routers we use serial cable
– To specify when we use crossover cable or straight-through cable, we should remember:
Group 1: Router, Host, Server
Group 2: Hub, Switch
One device in group 1 + One device in group 2: use straight-through cable
Two devices in the same group: use crossover cable

For example: we use straight-through cable to connect switch to router, switch to host, hub to host, hub to server… and we use crossover cable to connect switch to switch, switch to hub, router to router, host to host… )

Notice in this question, connecting to the Frame Relay means connecting to another router. Also we must use serial cable (or Fiber Optic cable) because the distance to the Frame Relay is far so we can’t use Ethernet cables.

Rollover cable can be used to connect a computer terminal to a network router’s console port. This is often used when we turn on the router for the first time.

Question 12

Question 13

Question 14

Question 15


Both switch and router separate collision domains. In other words, each port of the switch and router creates one collision domain so we have 15 collision domains in this topology.

Comments (46) Comments
Comment pages
1 2 324
  1. shakaxl
    April 21st, 2016

    I same , where are the question? 🙂

  2. Mike Mine
    April 27th, 2016

    I think question 1 could be a ROUTER and a BRIDGE, because bridge can split brobcast domain in 2, and switch is a switch it’s purpose to separate yes switch layer 3 can do simple routing and it can separate vlan broadcast.

  3. NAye
    May 16th, 2016

    please, where are the questions ???

  4. Alz
    May 24th, 2016

    i am writing ICND1 monday the 30 may were do i focus my study?
    can someone pls help me with valid dump….
    what are stimulation and subnetting question????

    pls is ensurepass a valid dump ?????????????

  5. Karachi
    June 15th, 2016

    Where are the Questions?????????????????

  6. Xcc
    July 5th, 2016

    Where is the bloodclot questions!!

  7. Robbi Hawaii
    July 6th, 2016

    For the questions, just click the link in the right hand window for each section. Questions are separated by subject and also by ICND1 & ICND2

  8. Anon
    July 16th, 2016

    Premium membership for questions.

  9. Lucas
    July 28th, 2016

    Any ACL questions on ICND1?

  10. azee
    August 13th, 2016

    @Lucas no ACL is ISDN2

  11. Anonymous
    August 25th, 2016

    where is questions hmm guys???

  12. root
    September 22nd, 2016

    please give us the questions

  13. Smith
    November 15th, 2016

    Get updated CCNA Interconnecting Cisco Networking Devices 1 (ICND1) exam full questions from http://www.dumps4download.us/free-100-101/cisco-question-answers.html

  14. adina
    February 2nd, 2017

    263 Questions With Answers
    100-105 Real Exams Question Answers
    Just 1 day study required to pass exam
    100% Passing Assurance
    Money Back Guarantee
    Free 3 Months Updates

    Dumps4download provide latest and valid Cisco 100-105 dumps you can visit http://www.dumps4download.com/100-105-dumps.html

  15. TEST
    February 5th, 2017

    how can you trust http://www.dumps4download.com/100-105-dumps.html if their website has full of spelling errors in it..

  16. Sensato
    February 9th, 2017

    Whats up!

    I take my test on March 14, 2017 and am currently enrolled in a course. I came in the course with no IT background, and i actually LOVE this field! Please help me with anything that can help me pass the test! my email is: Dm0ney718 at yahoo punto com.

    Thank you!

  17. Rob
    March 10th, 2017


    Everyone, please read this.
    I’m really sick of these test dump sites that charges you $50 for wrong answers! They all say “Pass or money back” but if you read the fine print, that will never happen.

    So, I have compiled my test dump with the user ANSWERS to make 1 big document. You will see a lot of repetitive questions and some that have different answers.. that’s because I couldnt find the definitive answer. All I can tell you is that I pass with a 900/1000 just by studying this file. This mean that I DO have some wrong answers.

    Here is the link to your free test dump!


  18. Packet
    March 14th, 2017

    Thanks @Rob! You are the best!

  19. urbanmonk
    April 8th, 2017

    Where are the questions? I can’t see them.

    Help !

  20. Squidoo
    April 11th, 2017

    @Rob. Thanks for the file. Much appreicated.

  21. Squidoo
    April 11th, 2017


  22. Fazz
    April 16th, 2017

    How to download tht dumps ? Do i have to install File Dropper ?

  23. Bob-doe
    May 8th, 2017

    Does anyone have any updates to Rob’s dump? Any insights on how many sims there were / are on the test?

  24. Yury
    May 29th, 2017

    Passed today,
    A few new questions, used the same dumps posted by Irina up in the comments, still valid!

  25. serj
    June 29th, 2017

    Cheers Rob for sharing such as good information.Much appreciate mate.

  26. kabir
    July 21st, 2017

    hi 9tut why i can not see any questions and answer visible for me.

  27. JoshyMiMi
    July 25th, 2017

    anyone have Exam Lab on Simulate Packet Tracer for CCENT, Pls share its. Thank you in advance.

  28. Harambe
    September 16th, 2017
  29. Atta
    September 27th, 2017

    @Rob: the link you shared we have to pay for the pdf. Will you be kind enough to send your pdf so that we don’t have to pay?

  30. Alas
    September 27th, 2017

    Hi Rob, do you think the questions here
    ( http://www.filedropper.com/100-105updatedasofmarch2017 ) will still show up if i take the exam on october?

  31. James
    October 5th, 2017

    Hi Alas ,
    i got 880 using dump from

  32. ed
    October 12th, 2017

    will question 10, the cable one be in the exam??

  33. kalumba
    October 29th, 2017

    any one with the latest icnd 1 dump my imail kanlawrence 43 @ gmail .com NB no spaces its one email

  34. Anonymous
    November 2nd, 2017

    can someone send me 101 -105 VCE dumps I have the VCE engine which I purchased for a high amount , you can send them on joseoluoch at gmail dot com please I am trying to re certify asap before end of the year

  35. naren
    November 4th, 2017

    why there are no questions only answers. .

  36. rooki
    November 15th, 2017

    congrats marquis, where did you got the dumps from, can you send it to my gmail plz: hanoos.hk @ g m a i l

  37. Tarvu
    November 16th, 2017

    Practicing and prepping for test. Any dumps sent to “lolzantz@gmail” for ICDN1 & 2 would be much appreciated! Thanks all!

  38. sam
    November 16th, 2017

    @ marquis What is the 353 dump and where did you get it?

  39. Collin
    January 4th, 2018

    Please send latest dump for the ICND1 and ICND2 test.
    ccb8sccb8s at gmail

  40. radhika
    January 12th, 2018

    questions are not there..only displaying answers..will u pls check it

  41. Where are the questions?
    January 13th, 2018

    Where are the questions?

  42. mac
    January 14th, 2018


    i am a networking professional trying to give CCNA again, can i get the dumps for ICND1 and ICND2 test on my email: {email not allowed} that would help a lot.

  43. mac
    January 14th, 2018

    “{email not allowed}”

  44. CCNA Certified
    March 5th, 2018

    You have to become an member to interact will all of the questions.

  45. alberthdr
    July 15th, 2018

    I just passed CCENT with 868 on July 6th, there are 54 questions, two labs one for RIPV2 and DHCP, one drag and drop question. 9tut helped me a lot. I have the questions, write me if u want help alberthdr @ hotmail dot com

Comment pages
1 2 324